圆度、圆柱度、圆跳动、全跳动的区别.pptVIP

Materials including information and pictures presented in this document are confidential and intended solely for the person or organization to whom it is presented. It may contain privileged and confidential information. If you are not the intended audience or recipient, you should not copy, distribute or take any action in reliance on it. All rights, including information and pictures presented in this presentation are sole properties of Amphenol-SAA Connecting people with technology 圆度、圆柱度、圆跳动、全跳动的区别 圆度 圆度检测 圆柱度 圆柱度检测 跳动度 圆跳动 圆跳动 圆度与圆跳动，圆柱度与全跳动的区别 从前面描述可知，圆度和圆跳动以及圆柱度和全跳动标注上有区别，前者不能有基准，后者必须要有基准。 这四个形位公差的共同点就是都不能用MMC和LMC修正，只能用于RFS。 圆度和圆柱度没有基准要素，故可以这样理解：圆度和圆柱度测量的时候用的轴心线是理论的没有公差的，使用的时候不考虑公差，而圆跳动和全跳动需要考虑基准的公差。 圆度和圆柱度测量时的定位 圆跳动和全跳动测量时的定位 Materials including information and pictures presented in this document are confidential and intended solely for the person or organization to whom it is presented. It may contain privileged and confidential information. If you are not the intended audience or recipient, you should not copy, distribute or take any action in reliance on it. All rights, including information and pictures presented in this presentation are sole properties of Amphenol-SAA Connecting people with technology