英文新LCD液晶控制盒ManualV3OlympianLED.PDF

Manual of LCD Remote controller Version 4.0 Operation Manual First, turn ON the switch,it will show the open animation , then show Gas Pricer picture then show the Gas Price(default mode). How to edit the Price? When you in interface of above, you can edit the price as below: EDITPress this key to enter the editing price function .the blinking cursor is on the first number of the 1# price. “up” use this key to move the blinking cursor to next sign . ( 4# 3# 2# 1# …… ) ▼“down”use this key to move the blinking cursor to next sign. ( 1# 2# 3# 4# …… ) --“right”Press this key to move blinking cursor right. ◀ “left”Press this key to move blinking cursor left. 0-9 by pressing the key ,you can change the number on the blinking cursor change to the number you pressed. ENT—use this key to send the changes to the LED sign. If the LED sign receive the date successfully ,the LCD remote controller will show “Send success” and will save the changes at the same time. If the LED sign didn’t receive the data successfully , the LCD remote controller will show “Send Failed”and will not save the changes . How to set the Parameters? Step 1 When you in the interface of editing price, you should first click “SET” Step 2 then click “EDIT”to enter the interface of setting parameters. What’s the 6 parameters meaning? Parameter 1: single side or double side. Parameter 2: how many signs on one side. When single sided ,it can be 1-12; When double sided it can be 1-6; Parameter 3 ：how many digits on one sign.(3-6) 9/10 is not included. Parameter 4: show 9/10 or not. (NO is not show;YES is show) Parameter 5: brightness level. (0-8)