基于arm的真空差压铸造控制系统研究-检测技术与自动化装置专业论文.docxVIP

万方数据 万方数据 Abstract Nowadays, counter gravity is mostly used in aircraft and automobile industry and national defense field. Due to it can meet the stringent demands of complex shapes, thin wall and high compactness, as well as, it can improve the manufacturing efficiency of the casting. So counter gravity casting technique, especially vacuum counter pressure casting occupies an important position in the field of thin wall casting. Along with the development of microcomputer technology, embedded technology is extensively used in industrial control field and before the mainstream field of research is based on ARM embedded system. So this topic is to research on the vacuum counter pressure casting control system and design a vacuum counter pressure casting control system of low power consumption, high reliability and good human-machine interface based on ARM embedded system technology. This topic combine ARM embedded technique and vacuum counter pressure casting technique together. Peripheral hardware design based on ARM embedded and software design based on embedded Linux system platform are mainly introduced in this paper. The processor of vacuum counter pressure casting control system is produced by Samsung S3C2440. Peripheral memory SDRAM and NAND FLASH have been extended. It also has peripheral circuit, such as network communication interface, serial communication, touch interfaces and USB communication interface and so on. The pressure acquisition circuit and driving circuit of digital combination valve are designed according to the control function of the casting. The software of vacuum counter pressure casting control system is based on embedded system platform that have the Linux as core to study device drive and application software. It has accomplished a lot of work, including U-boot loader program and the transplantation of Linux system, the construction of the root file system, the transplantation of MiniGUI graphic user interface, the development of devic