基于arm的通信监控系统设计-电路与系统专业论文.docxVIP

摘要 摘要 摘要 随着现代工业的发展，对通信监控系统的性能要求很高，越来越向着高性能、 低功耗、低成本的方向发展，同时要求有友好的人机交互界面，这对通信监控系 统的软硬件设计都提出了很高的要求。为了更好的对油井进行监控，本文设计了 一个基于 ARM 平台的通信监控系统，该系统以 ARM9 内核的 S3C2440 为主控芯 片，嵌入 Windows CE 操作系统。本文在对 ARM 监控板硬件电路介绍的基础上， 重点讨论了 ARM 监控板的通信监控软件设计。 通信监控系统由数据采集模块和 ARM 监控板两部分组成。数据采集模块以 PIC 单片机为核心，负责采集油井温度、压力等数据；ARM 监控板负责对油井数 据进行存储、备份、LCD 显示以及预警，同时也负责与监控中心进行数据交互。 本设计采用模块化的设计思想，完成了 ARM 监控板的软硬件设计。硬件方面， 以 ARM 为核心，实现了串口、网口、USB 接口等通信模块以及触摸屏显示模块 的设计；软件方面，以多线程的方式，实现了界面控制、串口通信、数据显示、 数据存储、数据上传、数据备份等功能模块的设计，完成了 ARM 监控板的软件设 计。最后，对整个系统进行了测试，通过多次测试，验证了系统设计的正确性。 关键字：油井通信监控 ARM Windows CE 数据采集 Abst Abstract Abstract With the development of modern industry, the communication monitoring system requires high performance, more and more toward high performance, low power consumption, low cost and the direction of development, and has friendly man-machine interface, the communication monitoring system software and hardware design are raised very high requirement.In order to better on oil monitoring, this paper designs and implements a ARM based communication monitoring system, this system based on the ARM9 kernel S3C2440 as the main control chip, embedded Windows CE system. On the basis of ARM monitoring board hardware circuit, This paper mainly discusses the software design of ARM control board. Communication monitoring system is divided into data acquisition module and ARM monitor board.The data acquisition module based on PIC MCU as the core, responsible for data collection; ARM monitoring board is responsible for the well data storage, backup, LCD display, as well as early warning, and is also responsible for data interaction with the monitoring center. The design uses a modular design concept, the completion of the software and hardware design of ARM monitoring board .In aspect of hardware, ARM as the core, the realization of the serial port, Ethernet port, USB interface communication module and a touch screen display module design; Software, multi-threaded approach to realize the interface control, se