基于arm的室内环境品质监控系统的设计-控制理论与控制工程专业论文.docxVIP

西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 西安建筑科技大学硕士学位论文 Design of indoor environmental quality monitoring system based on ARM Specialty: Control Theory and Control Engineering Name: Wei Lu Instructor: Prof.Ren Qingchang ABSTRACT Since the reform and opening up, the economy has been presenting rapid and steady development in our country, the resulting environmental problems have become the focus of attention. Among them, the Indoor environment is the prominent one. The quality of indoor environment will directly affect peoples health and productivity, therefore, it comes very important to design a real-time monitoring equipment of indoor environment quality status. This topic experiments on the platform of total heat exchanger fan, which is in the laborary of Intelligent buildings and Building Automation of Xian University of Architecture and Technology, and designs the indoor environment quality monitoring system based on ARM. This system will real-time monitor the indoor environmental factors and comprehensively evaluate its air quality level. While the indoor air quality status is poor, this system will timely remind people of preventive measures, and automatically trigger the total heat exchange ventilator for indoor environmental quality improvement. This article firstly describes several important factors that influence the quality of indoor environment, and gives a brief introduction on the related technologies and research status at home and abroad; secondly, with the theory of intelligent control, the indoor air quality evaluation algorithm is presented based on genetic neural network; thirdly, combining with actual cases, the genetic neural network model for indoor air quality evaluation is implemented, and Matlab simulation is carried out for verification, results show that, this algorithm can well grade the indoor air quality situation, sequence the different room air qualities in level. and provide the reliable basis for the next chapter of the int