针对液压顶紧器螺纹联接强度变形分析.pdfVIP

学兔兔 第41卷 第1期 石 油 化 工 设 备 V0I．41 No．1 2012年1月 PETRO-CHEMICAL EQUIPMENT Jan．2012 文章编号：1000—7466(2012)01—0036—04 液压顶紧器螺纹联接强度变形分析 李 亮，邓子龙，高德胜 (辽宁石油化工大学机械工程学院，辽宁抚顺 113001) 摘要：液压顶紧器是焦炭塔底卸盖机中起密封作用的主要设备之一。鉴于液压顶紧器的工作环境 温度高、承受栽荷强度大等特点，对其与底盖装配处容易失效的螺纹进行强度与变形计算。利用 ANSYS传热分析给出螺纹部分的温度进而确定材料在该温度下的力学性能，并施加预紧力及外 载荷，采用非线性接触分析得出应力应变变化情况，此计算结果可为类似设备的改进设计提供一定 的理论依据。 关键词：液压顶紧器；ANSYS；变形；强度 中图分类号：TQ 050．2；TE 962 文献标志码：B Analysis of Intensity and Distortion for Threaded Connections of Hydraulic Clamp LI Liang，DENG Zi-long，GAO De-sheng (School of Mechanical Engineering．Liaoning University of Petroleum 8L Chemieal Technology，Fushun 1 1 300 1，China) Abstract：The hydraulic clamp is the important sealed equipment to coke tower in delay eoking device．Because of the high temperature and large strength born by the hydraulic clamp，there is a simulation for these locations which are easy to lose effectiveness．The temperature of the loca— tion of the threaded connections，and the character of mechanics were analyzed with ANSYS． The conclusion of stress and distortion by giving the pretightening force and external applied load were obtained by using the method of nonlinear contact analysis．The result could provide the theoretical basis for the further improvement of the similar equipment． Key words：hydraulic clamp；ANSYS；intensity；distortion 延迟焦化装置中，人工拆卸焦炭塔底盖连接螺 设计，正常工作时所需的密封力由32组液压顶紧器 栓工作中存在高危、低效、无法控制、劳动环境差和 提供，以自动补偿温度变化产生的变形，此密封力比