华亭煤矿巷道冲击地压灾害预警研究-安全技术及工程专业论文.docxVIP

S Subject ： Study on Hua-ting Coal Mine Tunnel Rock burst Disaster Warning Speciaty ：Safety Technology and Engineering Name ： Liu Zhenguo (Signature) Instructor ：Xie Junwen (Signature) Cheng Wendong (Signature) ABSTRACT As the increase of depth and strength of mining, the amount of rock burst mines mounted up. In the pillar of fully mechanized caving and mining face of 250103 mining section of Hua-ting coal mine, this phenomena is more frequent and violent causing the dangerous situation in the 250103 mining section. Therefore, the research of prediction and pretreatment method of Hua-ting caol mine rockburst contributed to improve the safety of mine. This paper firstly rockburst formed to analyze causes and impact of risk for Hua-ting coal, FLAC3D numerical simulation of simulated coal rocks of tectonic stress on the roadway impact, and comprehensive index method to determine the impact of coal and rock Hua-ting coal mine250103 working face tendencies characteristic; And 250103 working face has strong burst potential and return air crossheading shock rock burst index than transport along the slot because of the 20m width pillar. The main factors of influencing the rock burst hazard of 250103 working face are folding structure, burst tendency of coal seam, hard main roof and 20m width pillar and so on. According to the analysis of 250103 mining section, the dangerous areas are defined during the mining process of 250103 working face, and some advices on prevention design, length of working face, width of pillar and mining sequence were given . The rock burst monitoring and controlling system of 250103 mining section were constructed. The drilling cuttings method, seismological method and roof monitoring were alternately and synthetically used to inspect and forecast the burst danger. The pressure release blasting in ribs, deep-hole blasting and water infusion in roof and coal seam methods were used to reduce the rock burst danger, and the safety of 250103