某地区10kV线电压波动治理方案-研究.doc

意义。 关键词：电压波动、无功补偿、潮流分布，PSASP、灵敏度分析、内点法 II 万方数据 ABSTRACT 10KV lines in a given area, there are many reasons can account for frequent fluctuations of the 10KV line voltage and inceased line losses, for example, load imbalance, existing large inductive loads, reactive power balance is not in place and so on. reactive power compensation device along substation frequent switching, seriously affecting the quality of power supply and network security and economic operation. One of the important measures to improve power system voltage stability of the power system is reactive power optimization. Reactive power optimization can make load forecast, site plan, planning and construction of power grid substation becomes more reasonable. Mainly through the installation of reactive power compensation equipment and the corresponding capacity in a reasonable position to balance the reactive power. Which can reduce long-distance transmission of reactive power and grid power loss, achieving economic stability of the power system operation. The problems of Reactive optimization in the power system belongs to nonlinear mathematical problem. Upon consulting a lot of relevant information, using the principles of classical Benders decomposition algorithm,which can make complex nonlinear mathematical problem decompose into two sub-problems, namely investment and operational problems. Then apply the primal - dual interior point affine scaling method to solve two sub-problems, making the calculation becomes simplifing. simulation software uesed in the power system is utilising mathematical models to replace the actual power system software. Using Mathematical methods to study the actual power system problems that may arise can realistically simulate the real power system. Power system simulation software can also aid operating personnel to make the right decisions, simplifying many problems existed in the past, thus saving the cost and improving the operating efficiency of the power system.