大型立式电机上导轴承数值模拟和工程实践-机械工程专业论文.docxVIP

II II 英文摘要 大型立式电机上导轴承的数值模拟和工程实践 The numerical analysis and engineering practice of the upper radial journal bearing of vertical motors Abstract The large axial flow pumps play an important role in water supplying, flood drainage, watering farms etc..The safety and efficiency of the vertical motor what drives the pumps, is the key exploitation of water conservancy project. The core components of the vertical motor is the Multi Tilting-Pad Journal Bearing, which ensure the vertical motor running in safe and efficient status. To manufacture and repair this bearing requires excellent technique. So, it is very necessary to conduct research on Multi Tilting-Pad Journal Bearing. In this thesis, a typical case about the TL-1000 vertical synchronic motor was selected to analyse the problem of higher temperature happened in many vertical motors in pumping station. The concrete research as below: The load of the journal bearing of vertical motor was analysed by ANSYS12.0.The practicability of decreasing the stress concentration of the groove was testified. The numerical simulation analysis of ameliorating bearing structural proved that, milling groove on the surface of journal bearing won’t cause stress concentration. The flow field and pressure filed of journal bearing oil slick in two different running state was numerical simulation analysed by ANYS FLORTRAN. By analyzing, the bearing capacity and distribution of the oil slick in different assembly clearance was obtained. The temperature field of oil slick was numerical simulation analysed by ANSYS FLORTRAN. The temperature field of journal bearing was numerical simulation analysed by ANSYS thermal. The analytic result indicate that by amplifying the assembly clearance and improving the condition of heat exchange, the temperature of journal bearing would be reduced. Based on the result of numerical simulation analysis, multi ways of technical transformation were carried out on the TL-1000 vertical synchronic motors of hai-yn