电冶熔铸碳化钨钢结硬质合金的微观组织研究-应用生态学报.PDF

23 2 矿　冶　工　程 Vol.23 №2 2003 04 MINING AND META URGICA ENGINEERING April 2003 ① 1 2 1 1 尤显卿, 黄曼平, 郑玉春, 程娟文 (1. , 230009;2., 230022) 　:, 。 , 。、X , 40%WC , 。 :;;WC; Reseach on Microstructure of Steel Bonded Tungsten Carbide by Electroslay Melting and Casting 1 2 1 1 YOU Xian-qing , HUANG Man-ping , ZHENG Yu-chun , CHENG Juan-wen (1.College of Material Science and Engineering , Hef ei University of Technology , Hef ei 230009, Anhui, China ;2.Anhui B uilding Engineering College, Hef ei 230022, Anhui, China ) Abstract:n accordance with the characteristics of wear resisting materials in use for mining and metallurgical engineering, a new type of steel-bonded tungsten carbide is developed by means of electroslag melting and casting .This new techonolog can produce low-cost large volume workpieces using waste steel-bonded carbides of powder metallurgy as raw material.Through op- tical microscopic, scanning electron microscopic and X-ray diffraction analyses of microstructure of the test material alloying 40%wc, it is shown that annealing and forging can improve the alloys structure . Key words:electroslag melting and casting;steel bonded carbide;WC;microstructure 　　 。 , ,。 。, 1　 。, ,[1 ～2] 。, , 、、、 , 、、, (, %):w (WC)=40%;w (C)= 200 ～300 /kg ;, 0.6 %,w (Ni)=1.7%, w (Mn)=0.5 %, Fe。 ,; 100 kW 、150 ,, kVA 。 [3] ;,