热压缩2519铝合金流变应力特征.pdf

22 2 矿　冶　工　程 Vol.22 №2 20026 MINING AND M TALLURGICAL NGIN RING June 2002 2519 1, 2 2 2 2 1 林启权 , 张　辉, 彭大暑, 林高用, 王振球 (1., , 411105;2. , ,410083) 　:Gleeble-1500 , 2519 。 -1 -1 300 ～ 500 ℃、0.05 ～25 s 。 :2519 -(ε﹒≤25 s ), -1 , , ;(ε﹒≥25 s ), , ;, Arrhenius ;Arrhenius Zener-Hollomon 2519 。 :2519 ;;;Z ; Feature of Flow Stress of 2519AluminumAlloy During Hot Compressive Deformation 1, 2 2 2 2 1 LIN Qi-quan , ZHANG Hui , PENG a-shu , LIN Gao-yong , WANG Zhen-qiu (1.College of MechanicalEngineering, Xiangtan University, Xiangtan 411105, Hunan, China;2.Department of Materi- als Science and Engineering , CentralSouth University , Changsha 410083, Hunan, China ) Abstract:The flow stressfeatures of 2519 aluminum alloy during plastic deformation at elevated temperaturewere studied by the isothermal compression test using Gleeble-1500 hot simulator.The compression testwas performed in the temperature rangefrom -1 -1 300 ℃to 500 ℃and in the strain raterange 0.05 s to 25 s .The experimental results show that theflow stress of 2519 alu- -1 minum alloy increased with increasing strain and tended to be constant after a peak value at lower strain rates (ε﹒≤25 s ), showing dynamic recover.Theflow stress sawtooth fluctuated and decreased after apeak valuewith the increasing strain athigher -1 strain rates(ε﹒≥25 s ), showing discontinuous dynamic recrystallization.A hyperbolic sine relationship was fo