基于粒子滤波的耐火材料声发射源信号恢复方法研究-机械工程专业论文.docxVIP

优秀毕业论文 精品参考文献资料 AbstractThe Abstract The main role of refractories is structural materials and linings which resist the high temperature in a variety of thermal equipment and high temperature container and it is significant to guarantee the safe operation of high-temperature equipment． Refractory damage which is affected by the actual working conditions and the environment seriously endanger normal operation even the quality of the furnace products．Therefore refractory damage identification is important．Refractory damage identification based on the acoustic emission signal analysis has become a hotspot of current research，but subject to impact of the delivery channel，distortion AE source information directly affect the accuracy of damage identification．So this paper carried out research ofAE source signal recovery,the main contents are follows． a．Considering the characteristics that the acoustic emission system contains both non．1inear situation and linear situation，this paper propose the source signal restored method based improved Rao·Blackwellized particle filter(RBPF)which estimate system state(source signal)by combining state·space model，The paper demonstrate the performance and advantage of improved RBPF on the recovery of refractory acoustic emission signals by theoretical and experimental angles． b．In order to establish an appropriate acoustic emission system model and because of the similarity of acoustic emission signal and seismic wave signal，the paper establish acoustic emission system state space model by the introduction of seismic wave model and modifying the parameters，then restored actual damage acoustic emission signal source signal by using standard PF，RBPF and improved RBPF，the three recovery signal were assigned weights according to the simulation and obtained the signal closest to the true value，it found that improved RBPF algorithm the best when obtained signals compared with the three algorithms recovery results． c．The paper analyze the pow