《星点黑白格织物原样分析与仿样设计论文》-毕业论文设计（可用）.docVIP

PAGE PAGE 毕 业 设 计 学生姓名： 学 号： 080901325 学 院： 纺织服装学院 专 业： 纺织工程（纺织品设计与贸易方向） 题 目： 星点黑白格织物原样分析与仿样设计 指导教师： (副教授) （副教授） 评阅教师： （副教授） 2012年6 月 毕 业 设 计 中 文 摘 要 原样为星点黑白格色织物，首先通过适当的方法对原样进行详细的分析，确定原样的主要规格，如：经纬纱特数、经纬密、经纬纱缩率及捻度、织物组织等等。原样经纬纱为44tex单纱，采用普梳纺纱系统转杯纺纱工艺，根据交货期及实际生产中的设备情况，选择合适的纺织工艺流程，确定纺织工艺参数，包括纺部各工序半制品的号数、牵伸倍数、捻系数，织部的整经配轴、墨印长度以及卷装容量等，并进行机器配台计算。再次，对织物的染整工艺进行分析，确定后整理工艺，同时进行成本估算。然后，根据织物规格进行上机试织，小样与原样对比，风格和手感有所差异，分析产生差异的原因，并根据实际情况调整工艺。最后，利用织物仿真CAD对来样进行仿真模拟，并根据织物用途、色彩知识和流行趋势，在原样品的基础上改变有关织物参数，利用CAD软件进行创新系列设计。 关键词 分析 工艺设计 创新 模拟 毕 业 论 文 外 文 摘 要 Title: Analysis and Duplication of black and white plaid Fabric Abstract The sample is black and white plaid fabric. First make a detailed analysis to the sample by the appropriate method to determine the sample specifications, such as: the number of warp and weft , warp and weft density, shrinkage and twist of the weft and warp yarn, fabric weave, and so on. The number of warp and weft yarn is 44 tex , so we can use carded spinning system. According to the delivery date and the equipment in practice, we can select appropriate technology of spinning and weaving ,and determine the technology parameters, including the spinning process numbers of semi-finished, draw ratio, twist factor, the length of the ink printed, etc.,then speculate the number of the machine . Again, fabric dyeing and finishing processes were analyzed to determine the finishing process, and cost estimates. Then, according to fabric specifications we can attempt to weave the sample .As for the difference in style and feeling between the sample and original sample ,we should analyze the cause ,and then adjust the technology according to the fact. Finally, we should use the fabric simulation of CAD to simulate the sample .According to fabric use, color knowledge and trends, we can change the fabric parameters of the original sample, and innovate