c40钢纤维混凝土多键齿干接缝抗剪性能研究桥梁与隧道工程专业论文.docxVIP

Abs仃actAbstract Abs仃act Abstract As a result of rapid construction，the construction technology of prefabricated assembly has greatly shortened the construction period and reduces the needed workers for the project．It is favored in the expensive labor cost area in European and American countries， and SO as in the developmg countries in the future．At the same time，due to its rapid construction，its impact of the surrounding environment and traffic is at relatively low level． It’S suitable for the modem busy urban environment．Due to it could be prefabricated in the factory,the section of the bridge’S quality can be guaranteed．At present，China is in a period of rapid development，with the progress of the society，the improvement of people’S living standard，the labor cost is also growing rapidly．Fast construction technology has a very broad application prospects．Due to its advantages of rapid speed and safety and the construction technology of precast concrete segmental bridegs will be more and more used in our country．However，the structural and mechanical behavior ofjoints between segments in China is lack of systematic research and design specifications．This has brought problems to the design。According to the research of“Research on key problems of Precast Segmental Concrete Bridges with Dry Joint”by Guangdong Provincial Department of education on the project of innovation and strengthening universities(20 1 4 KTSCX060)，this paper deeply studies the shear strength of the key based on previous studies．The main research includes the following aspects： (1)Construction ofjoint of Precast Concrete Segmental Beam Bridge Joint is the important part of precast concrete segmental bridge．The structural characteristics and application scope of different types ofjoints will be summarized．Dense key structure is adopted in the joint surfaces of precast concrete beam bridges in modem segment．By analyzing the structure and stress characteristics of the keys in different parts of the sect