复合型微细电火花工具电极加工装置的开发及实验研究机械工程专业论文.docxVIP

广东工业大学硕士学位论文值电压控制法，并对比了恒速进给时工具电极损耗率，得出该策略的有效性。并考 广东工业大学硕士学位论文 值电压控制法，并对比了恒速进给时工具电极损耗率，得出该策略的有效性。并考 察了开路电压、放电频率、主轴转速、占空比对小孔加工去除率的影响，优化了小 孔加工工艺。 关键词：复合电火花加工；线电极磨削：块电极磨削；LabVIEW；微细小孔加工 万方数据 ABSTRACTABSTRACT ABSTRACT ABSTRACT With the development of science and technology,machinery manufacturing into the precision，miniaturization phases，Especially in the field of electronics，optics， biotechnology made increasing demands of miniaturization of products，Miniaturization miniaturization become the trend of development．Micro—EDM technology as an important method for the manufacture of fine art has its unique advantages，Including processing a wide range，tool electrode and the workpiece is no macroscopic force，easy to guarantee precision，good controllabilitY,etc．Micro EDM technology mainly includes the wire electrode discharge grinding(WEDG)and block electrode discharge grinding (BEDG)．WEDG has the characteristics of high machining accuracy and low efficiency， BEDG has the characteristics of low processing precision and high efficiency．This paper will study a multi—functional micro machining devi ce to achieve BEDG in combination with、舾DG This paper firstly introduces the method of micro electrode fabrication and its characteristics，And expounds the important significance of the on—line production of electrodes．On the basis of this research，the WEDG and BEDG composite processing system is designed based on the laboratory multi function micro machine tool，The system includes an BEDG module and WEDG module，and coolant recycling module This paper designed a non suspended discharge wheel，Greatly improves the stability of the wire electrode．For the wire electrode module，a hysteresis brake is proposed to provide the tension of the wire electrode with the friction，Reducing the moment of inertia of the wire electrode，Improved the stability of the wire electrode．In the process of module design，the main parts of the structure simulated by using ANSYS software，Simplify the design process．