中型水库面板堆石坝填筑碾压质量管理研究管理科学与工程专业论文.docxVIP

ABSTRACTThe ABSTRACT The concrete faced rockfill dam(CFRD)originated in the United States in nearly 40 years，gradually developed a new class of dam structure type，having a cross-sectional structure，high safety performance，abundant raw materials，the construction is simple and convenient，and low cost，is the world’S more of a choice of dam type．AppUcation in China have become increasingly common，especially in the mountainOUS area rich in raw materials，its construction iS better．However,late in the construction of this dam type of application，there have been some early quality disease， the study found that rocldill dam filling and roller compaction process of quality control and evaluation system is imperfect is an important reason for them，traditional quality control methods Can not ensure rockfill dam filling and roller compaction construction quality and reliability．Therefore，in order to enhance the quaUty of management，the research of process quality control and effect evaluation method is very important． In this paper,through the analysis of concrete face roclffill dam filling and roller compaction process，found that heavy and difficult quality management as follows： 0)The indicator of RCC dam filling process quarry control is excessive，and its importance Call not be distinguished；②Construction Quality Management Information management is still static point by point comparison，without the introduction of dynamic process control concepts． Therefore，the article USeS the expert investigation method and the multi-level gray comprehensive evaluation model，rolling from the dam filling process quality control to select a number of indicators and quality rockfill dam typical disease associated with the formation of a larger index(grading，compaction degree，permeability coefficient， softening coefficient)，as a key indicator of rockfill dam dam filling and rolling process quality contr01．Then process quality control method applied to the concrete face rockfill dam filling and