SPIDER6065SPIDER6100电气控制部分-Nice开门机、平移门电机.PDFVIP

V. 006 SPIDER Electronic control unit for: SPIDER 6065 SPIDER 6100 电气控制部分 安装说明手册 QUESTO LIBRETTO È DESTINATO SOLO ALLINSTALLATORE. Linstallazione dovrà essere effettuata solamente da personale professionalmente qualificato in conformità a quanto previsto dalla legge n° 46 del 5 marzo 1990 e successive modifiche ed integrazioni e nel pieno rispetto delle norme UNI 8612. 中 文 1) 介绍： The electronic control card is suitable for the control of sectional doors, counterweight type overhead doors and spring type overhead doors, operated by the NICE SPIDER 6060 and 6080 24V electromechanical actuators with 24 Vdc motors. The control card can provide “Hold to run control”, “semi-automatic” and “automatic” modes of operation for these units. When the door is in operation, movement will be interrupted by activation of the safety inputs (stop and photocell). Open and close positions are set with limit switches and braking during closing will reduce speed and noise at the end of the manoeuvre. The 433.92 Mhz radio receiver built into the control unit is suitable for the Flo1, Flo2, Flo4 and Very VE transmitters; the code is memorised with the self-learning technique. As an alternative to the built-in radio the unit will accept any of the range of plug-in Nice radio receivers The unit has been designed to guarantee maximum reliability, safety and flexibility of use 1.1) 说明： 安装前务必完整阅读本手册！ Quick Reference Chart Fig. 1 1: 编程键 15 14 2: 逐步键( PP ) 3: 拨动开关，选择运行模式 4: 减速选择跳线 5: 开启力量调整旋钮