基于ARM的RFID系统数字基带的研究-电磁场与微波技术专业论文.docxVIP

- - II - 南京邮电大学硕士生学位论文 英文摘要 Abstract With the advent of radio technology and large scale integrated circuit of universal application, the radio frequency identification (RFID) technology produced. It is a kind of advanced automatic identification and data capture techniques. In recent years, radio frequency identification technology became more and more applied in many fields. It is improved the people’s life level, raised the economic benefits of the enterprise, strengthen the social public security and improved the social industrialization and the level of information exerted an enormous influence. This thesis combined RFID reader and the part of tag digital baseband’s system architecture, compiled on the basis of the theory, technology of decoding methods, anti-collision algorithm for radio frequency identification reader and tag digital baseband part of the study, completed design of the system and modular based on the key technologies of the ISO the-IEC_ CD 18000-6C standard RFID reader digital baseband system. The main contents as follows: first of all, we need to understand and master the ISO-IEC CD 18000-6C_standard, only by mastering the key information of the ISO-IEC CD 18000-6C _ standard, for example, the output waveform coding, the input waveform coding, the rate of the output waveform, the rate of the input waveform, the synchronization problem (guidance code and frame synchronization ), communication between label and Read and the selection of check code, can we be good to continue to the next step of work. Secondly, we should be familiar with the RFID digital baseband system, and should divide the whole system module. To eat the whole bread at once is Impossible, do it step by step is the key. The whole system consists of three modules: transmitting module, receiving module, control module. Finally, on the basis of the Linux operating system, we achieved the function of each module with the use of ARM Edition (S3C2440).The function of each modul