基于AT89C55WD单片机的机电产品控制器开发-电气工程专业论文.docxVIP

The The controler development of mechanical and electrical products based on AT89C55WD single flat machine Abstract This artical designs the controller of Machine_Elcctronic Products Based ON Single Chip Computer AT89C55WD，which call be used in the intelligence and somo industrial electronic equipments melts and upgrading．It is economical，small in bulk， steady，etc，which caIl both economize the cost and make the full use ofresourcas，as well as enhance on the reliability of the system，as used in the design of the embed system．The digest elaborates the development of Single Chip Computer AT89C55WD with CMOS Bytes in high function，which is based 011 low voltage．This design has the function of simulant and digital input-output which uses standard keyboard as input equipment and the display of liquid crystal，have printer interface and 485 communication network functions．Author has carried out complete circuit design in paper work for this eontroler,have allocated as far黜possible human nature the man-machine interface that melts．have designed corresponding software system． Keywords：Hardware Interface，Single Chip Computer,Bus design． 插图清单图2．1 插图清单 图2．1 AT89C55wD的引脚 ． ．．5 图2．2硬件结构 ． ．．6 图2．3主程序流程 。7 图3．i AD7890的内部结构框图 ． ． 8 图3．2硬件连接示意图 ． ． 10 图3．3^D7890转换的C51函数程序框图 ．．11 图4．1单片机的总线结构 ．．．12 图4．2 RS一485点对多点／两线半双工通信连接示意图 13 图4．3串口通信的连接电路 ．14 图5．1该模块与上位单片机系统的连接关系及信号定义 ．15 图5．2键盘接口时序 ． ．．．16 图5．3单片机系统与标准Pc键盘接口模块原理框图 ．16 图5．4主程序流程图 ．．19 图6．1模块结构原理 ．21 图6．2显示器接口电路 ．．22 插表清单表4．1 插表清单 表4．1 RS．232引脚分配 。13 表4．2 RS．485输出信号及接线端子引脚分配 。13 表6．1 T6963C的引脚功能 ．2l 表6．2引脚信号功能 ．．21 表6．3指令表 。23 表6．4面板26线扁平双排的引脚序号 24 表6．5面板26线并口各引脚信号定义 25 独创性声明本人声明所呈交的学位论文是本人在导师指导下进行的研究工作及取得的研 独创性声明 本人声明所呈交的学位论文是本人在导师指导下进行的研究工作及取得的研 究成果。据我