LCD1602液晶屏驱动模块.docVIP

LCD1602液晶屏驱动模块?1、可直接嵌入到项目中使用?2、晶振频率：1M?3、如晶振提高低层驱动延时要作相应修改 ?AVR_AFA? HYPERLINK \t _blank ?程序编写过程中参照了peak的4线显示程序?peak：AVR论坛技术版版主*/ #include iom16v.h #define RS_CLR?PORTD = ~(1 PD3)#define RS_SET?PORTD |= (1 PD3) #define RW_CLR?PORTD = ~(1 PD4)#define RW_SET?PORTD |= (1 PD4) #define EN_CLR?PORTD = ~(1 PD6)#define EN_SET?PORTD |= (1 PD6) /*延时函数*/void delay_us(unsigned int n) { ?if (n == 0) {??return ;??}?while (--n);} /*延时函数*/void delay_ms(unsigned char i) { ?unsigned char a, b;?for (a = 1; a i; a++) {??for (b = 1; b; b++) {???;???}??}} /*显示屏命令写入函数*/void LCD_write_com(unsigned char com) {??RS_CLR;?RW_CLR;?EN_SET;?PORTB = com;?delay_us(5);?EN_CLR;} /*显示屏命令写入函数*/void LCD_write_data(unsigned char data) { ?RS_SET;?RW_CLR;?EN_SET;?PORTB = data;?delay_us(5);?EN_CLR;} /*显示屏清空显示*/void LCD_clear(void) { ?LCD_write_com(0x01);?delay_ms(5);} /*显示屏字符串写入函数*/void LCD_write_str(unsigned char x,unsigned char y,unsigned char *s) {???? if (y == 0) {??? ?LCD_write_com(0x80 + x);??? ?}??? else {??? ?LCD_write_com(0xC0 + x);??? ?}??? ??? while (*s) {??? ?LCD_write_data( *s);??? ?s ++;??? ?}} /*显示屏单字符写入函数*/void LCD_write_char(unsigned char x,unsigned char y,unsigned char data) {???? if (y == 0) {??? ?LCD_write_com(0x80 + x);??? ?}??? else {??? ?LCD_write_com(0xC0 + x);??? ?}??? ??? LCD_write_data( data);? } /*显示屏初始化函数*/void LCD_init(void) {??DDRB = 0xFF;??????/*I/O口方向设置*/?DDRD |= (1 PD3) | (1 PD4) | (1 PD6);?LCD_write_com(0x38);????/*显示模式设置*/?delay_ms(5);?LCD_write_com(0x38);?delay_ms(5);?LCD_write_com(0x38);?delay_ms(5);?LCD_write_com(0x38);??LCD_write_com(0x08);????/*显示关闭*/?LCD_write_com(0x01);????/*显示清屏*/?LCD_write_com(0x06);????/*显示光标移动设置*/?delay_ms(5);?LCD_write_com(0x0C);????/*显示开及光标设置*/}