基于DSP的感应加热电源全数字化控制的研究-电力电子与电力传动专业论文.docxVIP

西安王9A_T-大学硕士学位论文Title：RESEARCH 西安王9A_T-大学硕士学位论文 Title：RESEARCH 0N A NOVEL DlGlTAL CONTROL METHOD FOR INDUCTION HEATING POWER SUPPLY BASED 0N DSP Major：POWER ELECTRONICSELECTRIC DRIVE Name：Bin WANG Supervisor：Prof．Yanru ZHONG Signature： Associate prof．Jingang LI Signature Abstract Induction heating power supply has been used extensively in the industrial process such as melting，foundry，siphon，forging，welding and surface heat treating wherewith its advantage of high heating efficiency,good controllability,and easy to mechanize and automate，etc．With an absence of domestic ultra-audio-frequency induction heating power supply at present，especially the low level of research for control technique，the research therefore makes good practical sense on digital control for frequency—tracking and power modulation． The digital control of ultra·-audio-frequency serial resonant induction heating power supply is mainly researched in this paper．Firstly the basic principle and developing actuality of induction heating is introduced briefly，and then the working principium of the ultra-audio·frequency induction heating power supply main circuit is analyzed． Based on analysis and comparison of previous frequency-tracking and power modulation technique，a novel digital control method is researched，which can implement the digital phase-shifted PWM control of output power with the precondition that the load frequency is tracked without phase error．Consequently the organic combination of digital phase locked loop(DPLL)and phase—shifted PWM is realized．Simulation results used MATLAB／SIMULINK verify the feasibility of the digital control method．The procedure of control system is compiled and debugged based on the TMS320F240 DSE Experimental results indicated the arithmetic can implement frequency-tracking and generate the drive signals of norm·-arm and shift·-arm with an adjustable phase··shift degree． Key words：Induction--heating；DPLL；Phase··shifted PWM；DSP 2 独创性声明秉承祖国优良道德传统和学校的严谨学风郑重申明：本人所呈交