基于DSP的非接触电能传输系统初级变换电路的研究-电气工程专业论文.docxVIP

无接触能量传输系统初级变换器的设计 STUDY ON DSP-BASED PRIMARY CONVERTER FOR CONTECTLESS ENERGY TRANSMISSION SYSTEM ABSTRACT Contactless power transmission technique is a novel power transfer method, which utilizes the electromagnetic coupling technology and power electronic technology to achieve contactless power transfer. The systems power supply and energy receiver assembly have no physical connections, so they can be independently installed, sealed and insulated. Nowadays, CEET systems are widely used in underwater facilities, electric vehicles, cranes, workshop transport system, auxiliary devices and artificial organ. The equivalent circuit model of the contactless transformer is given through analysis of the load of the converter. TMS32OF2812 DSP is used to design the hardware circuit of primary converter in contactless power transmission system. A hardware framework of control system is given and the main circuit, the DSP control circuit, PWM control and protection circuit and switch tube drive protection circuit are analyzed in detail. The characteristics of the full bridge series parallel and series-parallel resonant converters with the separate transformer are analyzed and the suitable device parameters are selected. The resonant frequency, compensation capacitor under resonant frequency and the constraint conditions to achieve ZVS control are discussed. The full bridge series resonant converter is analyzed by circuit simulation. KEY WORDS：Contactless，Series-connected Resonant，，Primary converter，DSP ii 河北工业大学硕士学位论文 河北工业大学硕士学位论文 非接触电能传输系统初级变换器的设计 非接触电能传输系统初级变换器的设计 PAGE PAGE 17 PAGE PAGE 16 第一章 绪论 §1.1 非接触电能传输技术简介 现在电能的传输主要是通过带电导体互相接触的形式进行的。这种电能的传输方式非常普遍，应用 技术也较成熟，但在某些情况下，这种电能传输的方式也有它的不足之处。环境因素在电能传输时，有 着很大的影响，如：空气中硫化物的含量、湿度、灰尘等都对电接触的有效性有着很大的威胁。当发生 接触不良时，很可能引发火灾事故，尤其是在一些易燃、易爆的环境，如化工车间、矿井等地方。接触 方式供电存在诸如易受到腐蚀、受潮、灰尘和污物的影响等诸多缺点。 非接触电能传输（Contactless Power Transmission）技术的研究时间还不长，只是最近才被人们 所重视，然而非接触电能传输的优越性使得人们越来越重视对它的应用基础的研究。它是一门综合性很 强的应用技术，是一种基于感应能量传递原理的新技术。将电磁耦合技术、电力电子技术与现代