基于DSP的腐蚀电化学测试系统设计-精密仪器及机械专业论文.docxVIP

AB AB STRACT Metal corrosion existed in modern industrial may cause great economic lOSS and social harm，therefore，corrosion detection technology is of great significance． In order to study the Electrochemistry Noise(EN)technology and Electrochemistry Frequency Modulate(EFM)technology,several experiments are carried out under different conditions．An EN test is taken on the surface of ventilation duct installed in a nuclear power plant．Another EN test is taken in hi曲 temperature(293℃)water in order to estimate the performance of the new ▲．I electrochemistry sensor．In the simulated marine environment，four kinds of constant potential tests are taken to detect the corrosion status of marine construction． - The testing results indicate that the EN signals call reveal the actual corrosion status of the nuclear materials effectively；the EFM technology has a good prospect of application in metal construction corrosion detection in marine． A distributive corrosion monitor＆detection system based on DSP is established according to the special demands of electrochemistry test methods and the feature of industrial field．The system which Can take multiple measuring methods for corrosion detection is consist of electrochemistry detection sensor,Zero Resistance Ammeter, Constant Potential Rectifier，Signal Generator，Data Acquisition Unit，Micro Control Unit，intemetwork communication module，and the Upper Monitor．An EN test experiment is carried out in the simulated marine environment,the analyzed EN data indicate that the system is in working order．An EFM test experiment is taken wim electrolytic cell equivalent circuit，the acquired EFM data wave forms indicate that the running of the operating system is normal and the design of EFM measuring software is correct． KEY WORDS：corrosion detection，EN，EFM，DSP 目录中文摘要 目录 中文摘要 ．．1 ABSTRACT ¨ 第一章绪论 1 1．1弓I言 1 1．2国内外腐蚀检测技术与仪器发展现状 ．2 1．2．1核电材料腐蚀检测技术 ．2 1．2．2海洋工程结构腐蚀检测技术 。2 1．2．3电化学测试仪器发展现状 ．3 1．3课题的研究内容与主要工作 ．3 1．3．1课题的研究内容 ．3 1．3．2本文的主要工作 ．．4 第二