基于MWorks的板翅式换热器仿真与优化-动力工程专业论文.docxVIP

华中科技大学硕士学位论文 华 中 科 技 大 学 硕 士 学 位 论 文 II II Abstract Plate-fin heat exchanger (PFHE) plays an important role in many fields, because of its compactness and high heat transfer efficiency. It is a main section in large-scale air separation system, and its action circumstances will shake the presentation of the organism. With the distributed parameter mathematical model, the performance of each passage in PFHE can be simulated based on the MWorks platform. And then guidance can be provided for heat exchanger’s further optimization in design and operation. Based on this theme, the work of this paper is mainly composed of the following several parts. This paper presents an effective method for the passage arrangement, together with the corresponding calculation program, after analysis and comparison the research achievements of predecessors, as the passage arrangement is the key to the design of heat exchanger. With this program, the computer can arrange the channel automatically and then according to the result of calculation of each passage the computer can optimize the existing array. A mathematical model is made for the multi-stream plate-fin heat exchanger, and difficulties for example the resolve of some parameters, design of the wall temperature, simulation algorithms and calculation current process are also discussed. The simulation program is written based on MWorks, which can be used to simulate the performance of the Plate-fin heat exchanger under changed conditions and establish the performance of the Plate-fin heat exchanger accurately. The package takes full advantage of the design language in MWorks, which improve the expandability, convenience and readability of the package. By comparing other literature data and the simulation results, we can see the feasibility and effectiveness of the proposed method. The passage which is poor III III performance of heat transfer in the simulation result is adjusted to optimize the passage array in PFHE. Bas