制造业生产流水线仿真与优化.pdf

内容 摘 要 本文提出的基于 Flexsim 的生产线仿真与优化，是根据我国现 行制造业生产流水的发展需求，通过仿真软件模拟得出具体的应用 数据。参考已有的各种生产线优化技术，通过分析模拟得出数据,对 生产线进行优化。本文重点针对仿真技术在生产线上的应用，从生 产线问题研究、仿真技术研究和生产线的优化三大块内容入手；通 过分析生产线、收集生产线数据和生产产品的步骤，为仿真建模做 好准备。仿真技术的研究，制定出仿真的方法和步骤，通过收集的 数据，建模仿真得出仿真的结果；再针对仿真所得的结果，采用现 有的优化方法对生产线进行优化；最后，通过对瓶装生产流水线实 例的 flexsim 仿真和优化，对以上三大块内容进行分析与实践，得 出有效的结论。 关键词：生产线、仿真、优化、flexsim I ABSTRACT This paper put forward by Flexsim based on simulation and optimization of the production line, according to existing manufacturing production lines in Chinas development needs, through the simulation of the simulation software that specific application data. And refer to a variety of existing technologies to optimize production line, through the analysis of simulated data to optimize production lines. This chapter focusing on technology in the production line, from the production line of study, simulation technology research and production lines to optimize， start with these three big parts. Analysis production lines to prepare for simulation modeling, data collection and production of production line products step. According to existing simulation technology, work out the steps of the simulation, through the modeling and simulation data simulation results obtained. Based on the simulation results obtained ， using the existing optimization methods to optimize production lines. Finally ， through the case about simulation and optimization of production bottle line, the above analysis of three large pieces of content and practice, to draw valid conclusions. KEYWORDS ：Production Line ，Simulation, Optimization, Flexsim