铜模铸造大块镁基非晶合金研究和发展.PDFVIP

2013 国铸造活动周论文集 铜模铸造大块镁基非晶合金的研究与发展 1 肖同娜，秦春玲，王志峰，刘丽，赵维民 （河北工业大学 材料科学与工程学院，天津300130 ） 摘要：近年来，随着航空航天及汽车等领域的快速发展，对材料的轻质高强性能提出了越来越高的 要求。镁合金具有密度低、比强度高、抗冲击、易回收、散热好、电磁屏蔽性好以及资源丰富等优 点。镁基非晶合金无晶界、位错等缺陷，具有更优异的力学性能，在航空航天、汽车、精密制造、 电子通讯与计算机、生物医学等领域具有广泛应用前景。大块镁基非晶合金材料已成为当前乃至今 后重要的研究方向。本文主要对铜模铸造法制备的不同成分的大块镁基非晶合金的非晶形成能力、 力学性能以及近年来的研究进展等方面进行了综述。 关键词：镁；铜模铸造；非晶合金；力学性能 Research and Development of Mg-Based Bulk Metallic Glass with Copper Casting XIAO Tong-na, QIN Chun-ling, WANG Zhi-feng, LIU Li, ZHAO Wei-min (School of Materials Science and Engineering, Hebei University of Technology, Tianj in 300130, China) Abstract: In recent years, with the rapid development of aerospace and automotive areas, the materials with light weight and high strength properties have been put forward higher requirements. Magnesium alloys have many advantageous properties such as low density, high specific strength, high impact resistance, easy to recycle, good heat dissipation and electromagnetic shielding, resource-rich and so on. Owing to the chemically homogeneous single-phase nature, Mg-based bulk amorphous alloys exhibit superior strength, low Young s modulus and good corrosion resistance, which are different from their corresponding crystalline alloys. These properties together with being easy to process in a viscous state make them highly promising as an advanced material, such as in the aerospace, automobile, precision manufacturing, and biomedical fields. Research on Mg-based amorphous alloys have become current and even future important research directions. In this paper, the glass-forming ability, the mechanical properties and re