基于机器视觉的异性纤维检测系统研究-机械电子工程专业论文.docxVIP

山东大学硕士学位论文ABSTRACT 山东大学硕士学位论文 ABSTRACT Though the proportion of foreign fibers in cotton is little，it does great harm to the cotton．FFDC(Foreign Fiber Detecting System)is used to detecting and cleaning up foreign fibers It can overcome a series of shortcomings such as low emciency and low quality when cleaning up foreign fiber manually．nle product’S quality is highly improved and cost is decreased by mounting the system in the gin process．Although there are some commercial products abroad，they are too expensive．To some extend， they are not fit for Chinese factories，SO it is very important to develop such machine to suit for Chinese factory． Tllis article thoroughly discusses about foreign fiber detecting technology． Through studying foreign and domestic development of FFDT(Foreign Fiber Detecting Technology)，A method is adopted in such system，which the system is mounted in the gin process．Some technical problems arc demanded in devising such system especially in gin process．The device’S whole structure is designed．Then the key technology ofthe subsystem iS detailed discussed． It iS very difficult to detect the foreign fibers from the cotton because of the diversity of foreign fiber and identity comparing with cotton．ne key factor of the problem is to find out the comlilon characters of the foreign fibers and derive them from the cotton．The article gives a color image clustering algorithm by which the foreign fibcr can be recognized from the cotton．However．in order to improve the ability of recognizing foreign fibers，an analysis method base on combined characters iS used in the sequent process．which the following characters iS adopted such as Area, Shape and Center Distance． ne foreign fibers should be cleaned up from the cotton ultimately，an optimal control method should be used to get high fallen cotton rate．while getting rid of foreign fibers．111e article gives a controlling method to clean up the foreign fibers validly．In addition，the key technologies involved ar