接地电极防腐涂层的研究-材料科学与工程专业论文.docxVIP

Study Study of Anticorrosion Coating of Grounding Electrode Qin Yawei(Materials Science and Engineering) Directed by Prof．Sun Yongxing Abstract To protect the transmission and distribution of electrical power system’S security， electrical power system ground material must be installed．We usually use the round steel， flat steel， angle steel or other steel materials as the ground material， and put the ground material into the underground，but the ground materials made of steel ale easily corroded． The electroless Ni—P／CNTs composite coating provided all important method to improve corrosion resistance of materials，what’S more it’S simple to realize，and the coating thickness is even．But there are many factors which affect the quality of coating，such as process， pre—process，bath various crafts parameter to match，the temperature and the Phvalue and when it comes to composite coating，the Second-phase particles will be a main factor which influences the corrosion resistance．And these factors were discussed in the article，we discussed how main parameters influence plating rate and bath stability．Emphatically analyzed how the density of carbon nanotube influence the corrosion resistance of composite coatings through full immersion corrosion test in acid·base salt solution,Electrochemical polarization curves test，microstructures and SEM．Through data contrast analysis，the best Electroless Ni·P··CNTs composite plating which has good corrosion resistance and good adhesion Was obtained．It provided good solution to the corrosion problem of grounding electrode which is meaningful not only to theory research but to actual production． Keywords：electroless plating；Ni-·P·—CNTs electroless composition coating； carbon-nanotube；corrosive resistance II 关于学位论文的独创性声明本人郑重声明：所呈交的论文是本人在指导教师指导下独立进行研究工作所取得的 关于学位论文的独创性声明 本人郑重声明：所呈交的论文是本人在指导教师指导下独立进行研究工作所取得的 成果，论文中有关资料和数据是实事求是的。尽我所知，除文中已经加以标注和致谢外， 本论文不包含其他人已经发表或撰写的研究成果，也不包含本人或他人为获得中国石油 大学(华东)或其它教育机构的学位或学历证书而使用过的材料。与我一同工作的同志 对研究所做的任何贡献均已在论文中做出了明确