循环流化床供热机组冷渣器余热利用-中国电机工程学报.PDF

第38 卷 增刊 中 国 电 机 工 程 学 报 Vol.38 Supplement Aug.31, 2018 2018 年8 月31 日 Proceedings of the CSEE ©2018 Chin.Soc.for Elec.Eng. 175 DOI ：10.13334/j.0258-8013.pcsee.2017007 文章编号：0258-8013 (2018) S-0175-06 中图分类号：TK 11 循环流化床供热机组冷渣器余热利用 祝令凯，郭盈，郑威，郭俊山，韩悦，商攀峰，张彦鹏，刘军 ( 国网山东省电力公司电力科学研究院，山东省 济南市250003) Waste Heat Utilization of Slag Cooler of CFB Heat Supply Units ZHU Lingkai, GUO Ying, ZHENG Wei, GUO Junshan, HAN Yue, SHANG Panfeng, ZHANG Yanpeng, LIU Jun (State Grid Shang Dong Electric Power Research Institute, Jinan 250003, Shandong Province, China) ABSTRACT: Due to the high temperature of the discharged 内脱硫、NO [1] x 排放低等优点 ，近年来发展非常迅 slag of circulating fluidized bed unit, the heat loss of the unit is 速[2-3] 。循环流化床机组通常燃用的是高灰分、低热 large. If this waste heat can be utilized properly, the thermal 值的燃料，排渣温度很高，往往达到 850℃以上， economy of the unit will improved greatly. The traditional way 排渣热损失占到入炉热量1%~2%[4]，如果能将这部 to utilize the waste heat of the slag cooler is to recover the heat from the slag to the condensate system. From the point of view 分热量回收利用，将大大提高机组的热经济性[5] 。 of energy consumption, this method is not the most economical. 冷渣器是循环流化床机组的重要辅机，设置冷 In this paper, a new waste heat utilization method of slag cooler [6] 渣器主要目的是为了降低底渣温度，以便于输送 ， was proposed for circulating fluidized bed heating units, during 近年来随着节能降耗要求的提高，冷渣器余热利用 the heating period, the heat of discharged slag is directly used 已经成为新的研究热点。现阶段国内外主流的冷渣 for heating the backwater of heat supply network, and in non 器主要有两种类型：流化床式冷渣器[7-9]和滚筒式冷 heating period,