如何减少扫描双面纸时出现的透底问题-Canon.PDFVIP

如何減少掃描雙⾯紙時出現的透底問題 How to reduce show-through when scanning 如掃描雙⾯紙張時，掃描器的光有何能因紙張較薄，讓掃描器的光穿透至紙張底⾯， 掃描影像出現透視陰影效果。如要減少透視陰影，您可使⽤IJ Scan Utility內建的減少 透視陰影的功能，下圖為使⽤前和使⽤後的比較。 When scanning 2-sided printing document, the light of the scanner may pass through the paper and show-through effect may exist. If you want to reduce show- through effect, you can use “Reduce show-through” function in IJ Scan Utility. You can refer to the pictures below to compare the result between “Before use” and “After use” the “Reduce show-through” function. 使⽤前（Before use）： 使⽤後（After use ）： 您可參考以下步驟使⽤「減少透視陰影」功能： You can refer to the procedure below to use the “Reduce show-through” function: 1. ⾸先開啟IJ Scan Utility ，然後按「設定」。（如不懂啟動IJ Scan Utility ，可按 此）
 Start “IJ Scan Utility”, and then click “Setting”. (Click here if you don’t know how to start “IJ Scan Utility”.) 2. 從左⽅選擇「⾃訂掃描」。 Please click “Custom Scan” on the right hand side. 
 
 
 
 
 注釋 (Note) • 除「⾃訂掃描」外，「⽂件掃描」也可選「減少透視陰影」功能
 Except “Custom Scan”, “Document Scan” also have “Reduce show-through” function. 3. 選擇來源選擇「雜誌」或「⽂件」，然後打開「影像處理設定」。
 Select “Magazine” or “Document” in “Select Source”, and open “Image Processing Settings”. 4. 剔選「減少透視陰影(Reduce show-through)」，然後按「確定」儲存並離開設 定。
 Select “Reduce show-through”, and then click “OK” to save the “Setting”. 
 
 
 
 5. 回到主介⾯後，按「⾃訂」按鈕開始掃描。 Back to home screen, and then click “Custom” to start scanning.
 -完- -End-