浅议悬臂梁桥及连续梁桥立面设计.docxVIP

  • 12
  • 0
  • 约5.14千字
  • 约 9页
  • 2019-02-26 发布于广东
  • 举报
浅议悬臂梁桥及连续梁桥立面设计 摘要:钢筋混凝土和预应力混凝土简支梁桥的经济跨度 分别为20m和40m左右。当跨径超过这个范围时,为了降低 材料用量和构件吊装安装的难度,应当采取减小跨中弯矩值 的其他体系桥梁。实践证明,悬臂体系和连续体系的梁桥, 可以作为重要的设计比选方案。 Abstract: The economic span of reinforced concrete and prestressed concrete simply supported girder bridge are 20m and 40mrespectively. When span is more than this range, we should adopt to reduce the other system bridges of the mid-span moment values, in order to reduce the amount of material and the difficulty of component lifting installation. Practice has proved cantilever system and continuous beam bridge can be used as an important design scheme? 关键词

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档