交通土建毕业设计（论文）-芜湖至铜陵高速公路第二标段设计.docx

全套图纸加扣?3012250582 全套图纸加扣?3012250582 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I 摘要 为了促进两地的经济发展和人民的出行，在两地设计一条高速公路以满足人民的需求。本设计为芜湖至铜陵第二标段高速公路设计，设计车速120km/h，全长2920.864m。 本路线设计的主要内容是：选线定线、平曲线 设计、纵断面设计、横断面设计；以及路基路面工程；施工组织和概预算。其中从两条比选路线选取一个比较合理的；对该路线进行平、纵、横设计，计算出相应的线性指标。在路基路面设计中，对路基进行相应的处理以满足要求，另外做好排水设施。在完成设计后，对将要进行的施工做好组织工作，以使得施工连续顺利进行。并对此项工程做好预算工作。 关键词：道路设计；纵断面；横断面；路基路面 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I Abstract In order to promote both economic development and peoples travel, to design a highway in order to meet the needs of the people.The design of Wuhu to Tongling second bid highway design, the design speed of 120 km/h, total length of 2920.864 m. The main content of this course design is: the concept of alignment, the plane curve design, profile design, cross-sectional design;And the roadbed engineering;The construction organization and budget.One from the two comparison route selection is reasonable;The line is flat, vertical, horizontal design, calculate the corresponding linear index.In the subgrade pavement design, processing to meet the requirements for subgrade accordingly, in addition to do drainage facilities., after fulfilling the design and construction of will to do a good job of organization, to make continuous construction smoothly.And for this project to do a good job of budget. Key words: road design;Profile;Cross section;roadbed 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc25420 前言 PAGEREF _Toc25420 1 HYPERLINK \l _Toc22700 1 概述 PAGEREF _Toc22700 2 HYPERLINK \l _Toc27060 1.1 任务依据 PAGEREF _Toc27060 2 HYPERLINK \l _Toc23512 1.2 道路地理环境与地质情况 PAGEREF _Toc23512 2 HYPERLINK \l _Toc27558 1.2.1 气候和地形情况 PAGEREF _Toc27558 2 HYPERLINK \l _Toc18365 1.2.2 水文地质 PAGEREF _Toc18365 2 HYPERLINK \l _Toc5727 1.3 路线设计指标 PAGEREF _Toc5727 2 HYPERLINK \l _Toc12657 1.3.1 路线状况 PAGEREF _Toc12657 2 HYPERLINK \l _Toc31814 1.3.2 道路设计指标 PAGEREF _Toc31814 3 HYPERL