基于现场总线技术的火灾自动报警控制系统研究-控制理论与控制工程专业论文.docxVIP

Studies Studies on Fire Auto Alarm control system Based On Fie}dbus Technique Specialty：Control Theory＆Engineering Name： Guo Quanmin Instructor：Guo Fangrui Abstract This paper summarizes the current teebnologies in the domain of fire auto detect＆ alarm system，sums up the advantages and disadvantages of all kinds of fire auto alarm control system，puts forward a novel fire auto alarm control system based on CAN—BUS， and details the principle and structure of the system．The principle of communication-·board which key part is Philips 8 bit single--chip microcontroller 80C652 is especially discussed，and the hardware schematics and software flow charts of communication—board a№put forward． The paper discusses the pivotal techniques of the system·--一the communication techniques of CAN-BUS and I。C—BUS systemic and particular,Sums up several important problems that were confronted and solved in the course of design．In CAN-BUS communication technique，the circuit design method of CAN—BUS node and the technique of structuring distributed CAN—BUS controlling network are put forward，bow to realize CAN calling and broadcasting communication under PeliCAN mode is explained thoroughly,and the computational technique of bit-timing parameter of CAN controller SJAl000 is detailed．In l‘C—BUS communication technique，the principle is introduced；the design of 12C-BUS node．the structure of 12C-BUS control network and the design of 1zC—BUS application in fire alarm control system are explained thoroughly． It is showed by practical running that the system has the strongpoint such as big capacity,long distance and high speed of communication and easily connecting to net3、70rk， and therefore will have a good market．Finally,the work of the paper and the next work of perfecting the system are summarized．and the prospect of fire detect＆alarm technol0937 ；s forecasted． KeywordsFire detect＆alarm，Single-chip controller,Fieldbus，CAN·BUS，12C—BUS， Distributed controlling network 声 声 明 本人郑重声明我所呈交的论文