基于无线传感器网络的粉尘浓度检测系统研究-控制理论与控制工程专业论文.docx

研究生优秀毕业论文 Research Research Dust concentration detection system based on wireless senso r networks Discipline：Control Theory and Control Engineering Student Signature： 嘲∥ Supervisor Signature： 易刃垒L— Abstract Pulverized coal explosion accidents occurred frequently in recent years，which have brou．g ht great harm to the safety of people’S lives and properties，as a result of this，security operation in pulverized coal production attracted much more attention．Explosion would be easilv occun．- ed in case of naked fire when pulverized coal concentration is too high in environmental air．so i t IS important to take accurately measurement of pulverized coal concentration．Pulverized COai belongs to solid phase which is different from that of air，the measurement method of whose c— oncentration need to be more properly homogonously,new challenge has been put forward in pulverized coal concentration measurement system． Much attempts have been done for measuring pulverized coal concentration in different CO untries，and different measuring method have been created based on different principles，such as induction electric potential method，microwave method，ultrasonic method，laser method．capa citance method and SO on．But systematic detection equipment for pulverized coal‘concentration is still in the stage of development，different ways of detection system has been produced based on different method，for example，wireless sensor network detection system which is based On optical fiber sensing，Ethemet，3 g network．These methods have their advantages and disadvan —tages in its transmission rate，the data reliability,suitable conditions and detecting scale，in one word，they are not the most accurate way to satisfied production requirement． In this paper,capacitance method was adopted in detection of pulverized coal concentrati． on the basis of previous studies，advantages of finite element method in electrostatic field simulation would be raised．ANSYS software was used for spiral capacitanc