基于神经网络的电阻层析成像系统流型辨识的研究-计算机软件与理论专业论文.docxVIP

哈尔滨理工大学工学硕士学位论文Flow 哈尔滨理工大学工学硕士学位论文 Flow Pattern Identification Based on Neural Network in Electrical Resistance Tomography System Ab stract Process tomography technique which iS from medical CT technique is mainly used to the research of multiphase flow regime，and also can be used tO real-time detection in multiphase flow parameter measurement．With process tomography technique，multiphase flow two-dimensional or three．dimensional space—time partial and microscopic distribution information can be obtained in multiphase flow parameter measurement，which provides an effective approach in solving the di伍culty of multiphase flow parameter measurement．Process tomography technique has made a great progress in the last ten years．According to the way of acquiring information and principle of sensor，process tomography technique can be divided into more than ten kinds such as electrical capacitance tomography,electrical resistance tomography,electromagnetic tomography and SO on．The subj ect investigated in this dissertation iS electrical resistance tomography system，which iS on the basis of resistance sensor principle。First， fuzzy clustering is used to fuzzy the measurement voltage data of the ERT system． then the fuzzy data iS taken as input information for the BP network．the fuzzy data of measure voltage are trained repeatedly in BP network，SO the four kinds of two—phase flow regime can be identified． The important meaning of multiphase flow measurement to the science research and industry production is summarized，at the same time main parameter, current status and developing trend of multiphase flow measurement technique are analyzed．In addition，the structure and technique characteristic of electrical resistance tomography system is clarified．The current status and broad industriaI application prospect of electrical resistance tomography are discussed．The key ．II— 哈尔滨理工大学工学硕士学位论文problems 哈尔滨理工大学工学硕士学位论文 problems that must be solved in the development of electrical resistance