货物分拣控制系统设计(终版).doc

word文档整理分享 参考资料 毕业设计(论文) 课 题 名 称 货物分拣控制系统设计 学 生 姓 名 学 号 系（院）、年级专业 电气工程系 指 导 教 师 职 称 讲师 2017年 5月 11日 参考资料 摘要 为了适应当下物联网的对货物分拣高效率的需求，设计这款货物分拣控制系统设计，采用的是货码识别系统结合位置传感器，对货物在传送带运送过程中进行实时监控并操作分拣。该设计大体分为两个部分，一是利用位置传感器探测货物位置，然后出发条码识别器对货物上的货码进行识别，并把识别到的信息传给系统；二是由系统进行处理分析后分配任务给挡板，由挡板把对应货码的货物推入指定滑槽中，从而对货物进行分拣。其中信息处理系统是使用PLC作为控制器，分别对分拣装置元器件操控的。对系统的运行检测后，可知该系统运行拥有稳定可靠且分拣效率高和出错率低等特点。 关键词：货物分拣控制系统；条码识别器；PLC ABSTRACT In order to adapt to the demand for goods sorting efficiency of Internet of things, the design of this kind of goods sorting control system design, combined with the position sensor is goods code recognition system, real-time monitoring of the goods in the process of the conveyor belt and sorting operation.The design can be divided into two parts, the first part is to use the sensor to detect the goods location, and then start the cord scanner on the goods code, which can identify the goods and pass to identify the information to the system;The second part is processed by the system after the analysis of distribution of tasks to baffle, the baffle push the corresponding goods yards of goods into the designated chute, thereby to sorting the goods.The information processing system is the use of PLC as the controller, respectively for sorting device components control.Run the test to the system, shows the system has stable and reliable operation and high sorting efficiency and low error rate. Keywords: cargo sorting control system;cord scanner;PLC 目录 TOC \o 1-3 \u 摘要 PAGEREF _Toc14723 I ABSTRACT PAGEREF _Toc8521 II 1前言 PAGEREF _Toc30553 1 1.1 课题研究目的 PAGEREF _Toc8373 1 1.2 分拣系统的发展 PAGEREF _Toc26347 1 1.3 研究课题的主要内容 PAGEREF _Toc16025 2 2 货物分拣系统方案设计 PAGEREF _Toc9487 4 2.1 系统方案设计 PAGEREF _T