间隙型白光LED荧光粉层涂敷的研究.docVIP

PAGE \* MERGEFORMAT 1第 PAGE \* MERGEFORMAT 1 第 卷 第 期 电子元件与材料 Vol. No. 年 月 ELECTRONIC COMPONENTS AND MATERIALS 间隙型白光LED荧光粉层涂敷的研究 江 宾1，宋国华1*，张广庚1，缪建文2，余鹏飞1 南通大学理学院，江苏 南通 226019；2.南通大学化学化工学院，江苏 南通 226019） 摘要: 针对现有远程荧光封装光源空间色温分布不均匀的问题，提出了一种间隙型荧光粉涂敷方法。通过在透明基板的不同位置上预留环状间隙，以及控制环状间隙的粗细来调节空间色温分布。理论分析和仿真都表明了这种方法能够改善空间色温分布均匀性，实验结果显示，在56mm直径的透明基板上，随着环形间隙直径或者间隙粗细的增大，空间色温分布均匀性先提升后下降，当环形间隙直径为44mm，间隙粗细为1mm时，白光LED的最小色温差异达到752K。 关键词：白光LED；远程荧光；荧光粉涂敷；色温分布；光效 中图分类号: TN312 文献标识码: A　 文章编号: Gap structure of phosphor coating for phosphor-converted white LEDs JIANG Bin1,SONG Guohua1*,ZHANG Guanggeng1 ,MIAO Jianwen2，YU Pengfei1 (1.School?of?Science,?Nantong?University,?Jiangsu Nantong?226019; 2.?School?of?Chemistry?Chemical?Engineering ,?Nantong?University,?Jiangsu Nantong?226019) Abstract: Aiming at?the?non-uniform correlated color temperature（CCT）distribution problem in space of remote phosphor packaged source, a gap structure of phosphor coating is proposed. By reserving an annular gap at different location and controlling the thickness of the annular gap to adjust the CCT distribution in space on transparent substrate. Both theoretical analysis and simulation show that the CCT distribution uniformity in space can be improved in this way, Experimental results show that, on a transparent substrate of 56mm diameter, with the increase of the annular gap diameter or thickness, CCT distribution uniformity in space improve first and then decline, When the diameter of the annular gap is 44mm, the thickness of the annular gap is 1mm, the least CCT difference of 752K in white LED is achieved. Key words: white-LED; remote phosphor; phosphor coating; color temperature distribution; light efficiency 江宾等：间隙型白光LED荧光粉层涂敷的研究 江宾等：间隙型白光LED荧光粉层涂敷的研究 随着光电技术与材料科学的不断发展，在全球能源危机与环境污染的背景