毕业论文-宁波某B型办公楼设计.docVIP

宁波某B型办公楼设计 宁波某B型办公楼设计 PAGE II PAGE II 本科毕业设计 土木工程 宁波某B型办公楼设计 A design of B-Type office buildingin Ningbo 宁波某B型办公楼设计 摘要：本次毕业设计是一幢宁波某B型办公楼设计，建筑面积约1600m2，主体结构为三层。设计包括建筑设计和结构设计两部分内容。建筑设计阶段进行了建筑的平面、立面及剖面设计，绘制了建筑工程图。结构设计的内容包括荷载设计、内力分析及构件配筋计算等。整个建筑采用钢筋混凝土框架结构，基础采用柱下独立桩基础，桩采用端承摩擦桩。在确定了框架布局之后，通过软件PKPM进行了各种荷载作用的计算，分析了结构的内力，找出了最不利的内力组，进行框架梁、柱的配筋计算。 关键词：办公楼；桩基础；建筑设计；结构设计。 A design of B-Type office building in Ningbo Abstract：The graduation design is to design a B-Type office building in Ningbo. The architecture has three stories.Its whole floorage is about 1600 m2. The design includes two stages in the design, the first is for architecture and the second is for structure. On the stage of architectural design, all the floor plan, facade, side view and section of the office are developed, and make the architectural working drawing. On the stage of structural design, the structural design comprises calculating of load, the analysis of internal force, reinforcement and so on. The buliding is based on a pile foundation which gets a force by friction. Various loads are calculated through software PKPM, the internal forces of the frame are analyzed, then found the combination internal forces which are the most unfavorable, the last make the drawing of beam and column. Key words：office building；pile foundation；architectural design；structural design 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc11001 第一章 毕业设计任务书要求 PAGEREF _Toc11001 1 HYPERLINK \l _Toc11841 1.1主要目标 PAGEREF _Toc11841 1 HYPERLINK \l _Toc31943 1.2主要任务 PAGEREF _Toc31943 1 HYPERLINK \l _Toc6727 1.3主要内容与基本要求 PAGEREF _Toc6727 1 HYPERLINK \l _Toc18908 1.4主要成果 PAGEREF _Toc18908 1 HYPERLINK \l _Toc10240 第二章 建筑设计说明 PAGEREF _Toc10240 3 HYPERLINK \l _Toc24105 2.1工程概况 PAGEREF _Toc24105 3 HYPERLINK \l _Toc5285 2.2 设计依据 PAGEREF _Toc5285 3 HYPERLINK \l _Toc17978 2.3 建筑做法 PAGEREF _Toc17978 3 HYPERLINK \l _Toc10710 第三章 结构工程软件介绍 PAGEREF _Toc10710 7 HYPERLINK \l _Toc20720 3.1 软件介绍 PAGEREF _Toc20720 7 HYPERLINK \l