一种无线网状网中的多接口多路径路由协议毕业设计开题报告等表格.docVIP

厦门大学软件学院《毕业设计（论文）》开题报告 学生姓名 班级 学号 指导教师 职称 教授 所在单位 屮国厦门大学 姓 名 教授 韩国首尔国立大学 毕业设计（论文） 题 目 一种无线网状网中的多接口多路径路由协议 1、毕业设计（论文）的目标: In recent years, the wireless mesh network (WMN) becomes a hot topic. WMNs are special case of mobile ad hoc networks where nodes have relative fixed position and communicate to the Internet through one or more gateways. The potential of wireless mesh network make broadband wireless Internet access possible and practical. There are many differences between wireless and wired networks, thus not all of the existing network notions could be used in wireless mesh networks. Routing is one of the key research areas in Wireless Mesh Network. Nowadays, million papers on this area have established routing protocols in wireless mesh networks to improve end-to-end throughput. Before we start, we have to know the fact that there are two main problems in WMN communications. First is the CS—channel competition. In case of a mesh node is transmitting data with others, no wireless communications in the transmitting channel will be admitted in its carry sensing area. Thus it limits the performance of the network. The second problem is Hidden Terminal. Protocol Hidden Terminal causes collisions (always be solved by RTS/CTS System) and Physical Hidden Terminal (can not be solved by RTS/CTS System) causes interferences. People implements multi-channel in order to avoid those problems Another concept 1 have to introduce is Multipath. Multipath is a way of improving throughput. Using multipath, one flow is divided into several flows, and be transmitted to destination concurrently, in order to achieve times of throughput than single flow. From the related works which have been done, we knew that there are four scenarios in routing protocols and their ideal packet scheduling as below: Single-Channel, Single-Path (SCSP) Scenario Multi-Channel, Single-Path (MCSP) Scenario Single-Channel, Multi-Path (SCMP) Scenario Multi-Channel, Multi-Path (MCMP) Scenario AB B(t) TA 4 峭spa