推土机及其零部件局部锈蚀的原因及防止措施.pdfVIP

25 5 Vo.l 25 N o. 5 Electroplating F in ishing 推土机及其零部件局部锈蚀的原因及防止措施 张瑞, 王春英, 王鑫, 李虎 (山推工程机械股份有限公司, 山东 济宁 272100) : 推土机涂装后整机和零部件在露天存放储运过程中 , 表面 快出现局部锈蚀现象, 影响了产品整体外观质量锈 蚀部位主要在棱角拐角边缘和角接焊缝处使用高压无气 喷枪喷涂导致上述部位虚喷, 漆膜厚度没有达到工艺要求 2 因此, 严格规定了棱角拐角边缘和角接焊缝处等部位应使 用空气喷枪喷涂 2. 1 : 涂装; 锈蚀; 推土机; 高压无气喷枪; 空气喷枪 , , : TQ639; TG 174 : A : 1004- 227X(2006) 05- 0026- 02 Causes and prevention of local rusting with bulldozer , and its parts/ / ZHANG R ,i WANG Ch ny ing, WANG , , Xin, LIH Abstract: Local r sting q ickly occ rs on the s rface of the 2. 2 b lldozers and their parts after coating treatm ent d ring the , period of storage and transport in the open air. It badly af , fects the entire s rface q ality of the prod cts. The r sty sites are m ostly at the corners, edges and their welding , lines. V irt al spray ing w ith highpress re airless spray ing , , g n at the above sites leads to thinner coating that can not , m eet the process req irem ents. Therefore, its strictly stip , lated that airspraying g n m st be sed for spraying sites of 2. 3 corners, edges, and the welding lines. , Keywords: coating; r sting; b lldozer; highpress re air less spray ing g n; airspray ing g n : Firstauthors address: Shant i Constr ction M achinery , 1 Co. , Ltd. , Jining 272100, Ch ina 1 , 70~ 420, , 1 , , Figure 1 Rusting of thewelding lines on bulldozer shovel , , 3 ,