波浪形振动倾斜板半连续铸造半固态AZ91D镁合金-Journalof.PDF

第33 卷第3期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol133,No.3 2012 年 3 月 Journal of Northeastern niversity( Natural Science) Mar. 2 0 12 AZ91D 管仁国, 赵占勇, 戴春光, 刘春明 ( , 110819) : , AZ91D # , , , # ,; ,; , 680 e , 400 mm, 100mm/min , # AZ91D , # : ; ; ;AZ91D ; : TG 111.4; TG 244. 1 : A : 1005-3026(2012)03-0381-04 Sem-i continuous Casting of Semisolid Billet of AZ91D Magnesium Alloy by Vibrating Wavelike Slo ing Plate Process GUAN Ren-guo, ZHA O Zhan-yong, DAI Chun-guang, LI UChun-ming ( School of Materials Metallurgy, Northeastern niversity, Shenyang 110819, China. Corresponding author: G AN Ren-guo, E-mail: guanrg @ smm.neu.edu.cn) Abstract: A sel-f made vibrating wavelike sloping plate device and a sem-i continuous casting machine were combined. The semisolid billet of AZ91D magnesium alloy was prepared by the proposed process, and the effects of the different process conditions on the microstructures were investigated. The results showed that in a certain scope, the shearing and cooling time is enlarged with the increasing of the plate length, which leads to the grain refinement. Vibration can improve the nucleation rate and obviously refine the microstructure. At the lower casting speed, the nucleation rate in the crystallizer is higher, which causes thefiner microstructure in thebillet. nder the conditions that the casting temperature is 680 e , the sloping plate length is 400 mm and the casting speed is 100 mm/ min, the semisolid billet of AZ91D magnesium alloy with fine microstructure is prepared by the sem-i continuous casting process. After re-melting, the fine s