环模制粒机可靠性设计与分析技术研究-机械制造及其自动化专业论文.docxVIP

研究生优秀毕业论文 AbstractPeIlet Abstract PeIlet mill，characterizedby hi曲e仃ectiveness and eXceIlent forIning e骶ct，is the main equipment to produce pellet feed and biomass pellet fueI．With the eVer increasing demand Of pellet feed and biomass pellet fuel，the market demand of pellct mill is also growing．Based on the fact that the reIiability of domestic pelleting equipment is bad，the research on the reliabili曰design and reljabilit)r analysis of pellet mill is conducted in mis paper．The aim of the research is to make some references for the optimal design and reliabili哆growm of pellet mill．The main work accomplished is as f01lows： (1)The reliability index of a certain t)rpe of pellet mill is assessed based 0n failure data． Then me distribution pattem of the timebet、veen failure is confi咖ed and seVeral reliability indexes of Dellet mill are deduced and computed according to it，proViding basis f．0r the anaIysis of dynamic reliability of pelIet mill． (2)The critical subsystems are ascertained and the Failure Mode EfI．ect and Criticality Analysis(FMCEA)of critical subsystems is conducted．Some measurcs are proposed to guarantee and improve the reliability of penet mill in accord with the anaIysis results· (3)The existing reliabilit)r allocation method—the fhzzy analytical hierarchy process (FAHP)is improved扑d the improved FAHP is印plied to the reliabil时allocation of pelIet mill and pelleting subsystem． (4)The re“ability model of the core component-_ring die is buiIt and the f．atigue life reliability and wear reliability are predicted respectiVeIy，then the reliabili够of ring die is analyzed synthetically． (5)The desi星m scheme of the existing ring die is modified and two new types of nng dles are proposed．Then the reli{山ility analysis of the two ring dies newly proposed is conducted· The result shows that not only the life distribution at the junction of flange and the outcr wall ofthe ring die whose cross aJlgIe o仆ole is 60。is improVed，but the reliability ofthjs rjng die is jmprov