复合式波纹板传热与阻力特性单吹瞬态试验研究-中国电机工程学报.PDF

第 37 卷 第 22 期 中 国 电 机 工 程 学 报 Vol.37 No.22 Nov. 20, 2017 2017 年 11 月 20 日 Proceedings of the CSEE ©2017 Chin.Soc.for Elec.Eng. 6675 DOI ：10.13334/j.0258-8013.pcsee.162386 文章编号：0258-8013 (2017) 22-6675-06 中图分类号：TK 124 复合式波纹板传热与阻力特性单吹瞬态实验研究 1 1 1 2 张磊 ，聂鹏 ，刘文娟 ，车得福 (1．西安热工研究院有限公司，陕西省 西安市 710054 ； 2．西安交通大学能源与动力工程学院，陕西省 西安市 710049) Single-blow Transient Test on the Thermal-Hydraulic Performance of the Composite Corrugated Plate 1 1 1 2 ZHANG Lei , NIE Peng , LIU Wenjuan , CHE Defu (1. Xi’an Thermal Power Research Institute Co. Ltd, Xi’an 710054, Shaanxi Province, China; 2. School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, China) ABSTRACT: The double notched (DN) plate is commonly 因而它在大型电站锅炉中应用广泛。 used in rotary air preheaters, but relevant investigations are rare. 波纹板传热元件紧密堆叠构成了回转式空气 Thus, thermal-hydraulic performances of the DN plate were 预热器的传热芯体，是其核心部件，承担着热量存 investigated in this paper. A refined single-blow, transient 储、传递作用。波纹板一般由金属平薄板制成，它 technique was used to measure the overall mean heat transfer 通过特殊设计的壁面形状诱发二次流动、增强流体 coefficients and friction factors. The measured results show that the performance of the DN plate approaches that of the 混合，强化传热。典型的波纹板型包括 DN(double double undulated (DU) plate and lies between that of the cross notched)板、CC(cross corrugated)板、CU(corrugated corrugated (CC) plate and the parallel plate. The Colburn factor undu