楼宇水塔水位检测系统设计.docVIP

PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 3 摘 要 社会在不断的发展和进步，人们的生活水平也在逐步提高和发展，我们的生活已经越来越离不开便捷的全自动控制系统，微型计算机发展是其中的一个不可或缺的重要分支，单芯机具有高可靠性，高性价比，低功耗，低电压等优点，以单片机为核心的全自动控制系统已经取得了广泛的应用前景和使用范围。 本篇论文是基于单片机的水塔水位检测系统设计。设计该系统主要是针对应用单片机的自动运行技术，使得水塔水位始终保持在一定范围内，从而确保连续正常的供水。本设计是以STC89C51单片机为核心的水塔水位检测系统，用以检测水位并对其进行控制、报警以及相应的处理功能，同时在Proteus仿真软件环境中进行仿真测试。测试结果表明，设计的系统具有一定的检测和控制功能，并且能够应用于实际生产生活当中。 关键词：水位检测；单片机；报警； Abstract Society in constant development and progress, peoples living standards are also gradually increase and development, our life is getting more and more inseparable from the convenience of automatic control system of microcomputer development is one of the indispensable important branch, single core machine has high reliability, high cost performance, low power consumption, low voltage, etc, with the single chip processor as the core of automatic control system has a wide range of application prospect and using range. This paper is based on single chip microcomputer water tower water level detection system design. Design of the system is mainly aimed at the application of single chip microcomputer automatic operation technology, makes the water tower water level always stay within a certain range, to ensure normal water supply continuously. This design takes STC89C51 microcontroller as the core of the water tower water level detection system, used to detect water level and carries on the control, alarm, and corresponding processing functions, at the same time in the environment of Proteus simulation software simulation test. Test results show that the designed system has certain detection and control function, and can be applied in the actual production of life. Keywords: Level; controlmicrocontroller; alarm; 目 录 摘 要 1 HYPERLINK \l _Toc357593677 Abstract 2 HYPERLINK \l _Toc357593678 目 录 3 TOC \o 1-2 \u \t 标题 3,3 1 绪论 5 1.1 研究背景 5 1.2 国内外研究现状 5 1.3 研究目的与意义 6 2 系统总体设计 7 2.1 设计要求 7 2.2 系统设计方案 7 2.3 系统工作原理 8 3 系统硬件设计 8 3.1硬件设计 8 3.2中央处理器模块 12 3.3继电器控制阀门模