shs0100992(英文版)管壳式换热器维护检修规程.docVIP

PAGE PAGE 10 The Chinese version of standards has precedence to their English translations which are only for internal reference. 本英文版为内部资料，仅供参考，以中文版为准。 Maintenance and Service Procedure for Petrochemical Equipment-- General Equipment Maintenance and Service Procedure for Shell and Tube Heat Exchanger （管壳式换热器维护检修规程） SHS 01009-92 (For Trial Implementation) Promulgated by SINOPEC SINOPEC Publishing House Contents TOC \o 1-1 \h \z HYPERLINK \l _Toc3363721 1 General PAGEREF _Toc3363721 \h 2 HYPERLINK \l _Toc3363722 2. Period and Content of Maintenance PAGEREF _Toc3363722 \h 2 HYPERLINK \l _Toc3363723 3. Maintenance and Quality Standard PAGEREF _Toc3363723 \h 2 HYPERLINK \l _Toc3363724 4. Testing and acceptance PAGEREF _Toc3363724 \h 6 HYPERLINK \l _Toc3363725 5. Service and Troubleshooting PAGEREF _Toc3363725 \h 9 1 General 1.1 Subject and scope 1.1.1 This procedure specifies the period and content of maintenance, maintenance and quality standard, testing and acceptance, and service and troubleshooting of heat exchanging equipment. 1.1.2 This procedure is applicable to the petrochemical steel shell-and-tube heat exchangers like fixed tubesheet exchanger, floating-head exchanger, U-tube exchanger etc., and kettle-type reboilers, with operating pressure below 35Mpa. 1.1.3 The service of pressure elements shall comply with SHS01004-92 “Maintenance and Service Procedure for Pressure Vessels” 1.1.4 References SY21003-73 Maintenance and Service Procedure for Heat Exchanger in Oil Refinery GB151-89 Steel Tubular Exchanger 2. Period and Content of Maintenance 2.1 Maintenance period The maintenance interval can be determined by individual enterprise according to the features of its production equipment. 2.2 Maintenance content 2.2.1 Cleaning tube bundle and shell. 2.2.2 Welding joint and expanded joint treatment of tube bundle and the replacement individual tube. 2.2.3 Check and repair the tube box, front and back cover, small and big floating heads, and fittin