基坑复合土钉支护结构变形的有限元计算分析-岩土工程专业论文.docxVIP

Finite Finite Element Computational Analysis of Deformation on Composite Soil-Nailing Retaining Structure for Excavation Abstract The technology of the excavated retaining is a hot topic in the geotechnical engineering．but its theory research often lagging behind the project practice．佻article carries on the two-dimensional model analysis based on ANSYS finite element software to the excavation for composite soil—nailing retaining structure，and confirmed the accuracy and the rationality of ANSYS through a concrete project example to apply to the deformation analysis of composite soil—nailing retaining structure．At present，the excavation retaining structural design way already has developed taking the intensity comroI aS deformation control，In this article deformation rule of the excavation was analyzed mainly,as well as the corresponding the influence analysis of the deformation． 刀lc main work includes： 1．1rI圮ordinary soil-nailing retaining structure the deformation rule Was analyzed and summarized．1rI地horizontal displaeement and the earth’S surface deformation assumes the shape distribution liking”the drum”and。’the saddle”separately．the apophysis of the pit bottom sticks out the deformation to the pit bottom above the bulge；nle plastic area and the shearing stress distribute in the slope bottom，the protection of the slope bottom should be strengthened in the construction． 2．Based on selecting reasonable parameter according to the criterion,The article carries on the influence analysis to ordinary soil-nailing retaining each parameter．It has studied the influence rules of the ordinary soil-nailing retaining structure’S maximum deformation separately，and the parameter includes the soil—nailing length，the soil-nailing horizontal spacing，the soil-nailing inclination angle，the soil·nailing diameter,the retaining wall thickness and the top of slope overload，and has produced the reasonable suggestion value ofeach parameter relatively． 3．Selecting a representative composit