T型同杆四回线线路故障选线新方法.pdfVIP

第41 卷 第18 期 电力系统保护与控制 Vol.41 No.18 2013 年9 月16 日 Power System Protection and Control Sep.16, 2013 T 型同杆四回线线路故障选线新方法 1 1 1 2 郭培育 ，邰能灵 ，于仲安 ，范春菊 (1.江西理工大学电气工程与自动化学院，江西 赣州 341000；2.上海交通大学电子信息与电气工程学院，上海 200240) 摘要：对由同杆四回线与同杆双回线构成的 T 型同杆四回线的故障选线进行了研究，提出一种先判断故障侧并识别故障侧支 路的故障选线方法。首先对同杆四回线电路部分进行解耦，分别得到两端的反序电流之间的关系。基于此电流关系判断出故 障侧，从而可以迅速确定故障发生的区域。在此基础上，引入正序电压差参数，实现对故障线路的进一步的选线。理论分析 及EMTP 仿真验证了所提方法的正确性，且选线精度高。 关键词：T 型同杆四回线；故障选线；反序电流；电压差 A new method of fault line selection for teed circuits with four-parallel transmission lines on the same tower 1 1 1 2 GUO Pei-yu , TAI Neng-ling , YU Zhong-an , FAN Chun-ju (1. School of Electrical Engineering and Automation, Jiangxi University of Science and Technology, Ganzhou 341000, China; 2. School of Electronic Information and Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, China) Abstract: Teed circuits with four-parallel lines on the same tower consist of four-parallel lines on the same tower and quadruple-lines on the same tower. After analyzing the fault line selection, a new method is proposed. The fault region is determined at first, and then the specific fault branch is identified. The mutual electromagnetic effect between four-parallel transmission lines is decoupled to obtain the relationship between the inverted-sequence current of two power source sides. According to that, the fault side is identified and the fault area can be determined quickly.