计及电压稳定的多源系统分区方法研究-电气工程专业论文.docxVIP

ABSTRACT Due to the influence of various factors such as fossil energy depletion and environmental protection, multiple new energy technologies such as wind power generation, solar photovoltaic power generation, solar thermal power generation continue to emerge and get applied, and it will inevitably become a trend for large amount of new energy to get integrated into the power system. Besides the clean energy brought to the society, the new challenge of safe operation of power system is also brought by new energy technology. For new energy generation including wind and photovoltaic power, the active power output characteristics tend to have greater volatility, and the reactive power output characteristics are also different from those of traditional thermal and hydro generator units. On account of the strong coupling of reactive power and voltage stability, the voltage stability of multiple power sources integrated system is bound to be one of the important issues of the safe operation of power system in the future. And the voltage stability weak region is of great significance to the surveillance and system voltage stability improvement, so the related study is necessary. The analysis method of voltage stability weak region of multiple power sources integrated system is emphatically studied, together with the related scene analysis. The main work is as follows. The static analysis model of conventional power sources, large scale wind farms and photovoltaic power plants integrated into the power system are studied and set up. The weak bus analysis methods considering voltage stability are studied, and the modal analysis is selected to obtain the voltage stability weak bus, and the electrical distance calculation based on reactive power voltage sensitivity between buses is taken to determine the voltage stability weak region. Based on the analysis method of the weak region of only conventional power sources integrated system, for the multiple power sources integrat