导管无扩口内径滚压连接接头连接强度性能研究.pdf

研究论文 RESEARCH 导管无扩口内径滚压连接接头连接强度性能研究 张荣霞 1，2，3 ，吴　为 1，2，3 ，曾元松 1，2，3 （1.中航工业北京航空制造工程研究所，北京100024; 2.塑性成形技术航空科技重点实验室，北京100024; 3. 数字化塑性成形技术及装备北京市重点实验室，北京 100024） [ 摘要 ] 无扩口连接技术是飞机液压管路系统重要的连接技术之一，具有较高的密封性和连接强度，可以满足飞机 安全可靠性的要求，越来越广泛地用于航空领域。以钛合金导管无扩口内径滚压连接件为例，采用有限元模拟和试 验相结合的方法，阐明连接强度的产生是由导管与管套径向接触力和管材嵌入管套凹槽形成的轴向抗拉脱阻力共同 形成的；同时得出了管套结构对连接强度的影响规律，指出凹槽深度适当加深可以提高连接强度，凸台过宽会阻止 管材嵌入凹槽降低抗拉脱阻力而使连接强度降低，对提高飞机液压管路可靠性具有重要的指导意义。 关键词： 导管；无扩口滚压连接；连接强度 Research on Connection Strength of Flareless Internal Rolling Tube Joint ZHANG Rongxia1,2,3, WU Wei1,2,3, ZENG Yuansong1,2,3 (1. AVIC Beijing Aeronautical Manufacturing Technology Institute, Beijing 100024, China; 2. Aeronautical Science and Technology Key Laboratory for Plastic Forming Technologies, Beijing 100024, China; 3. Beijing Key Laboratory of Digital Plasticity Forming Technology and Equipment, Beijing 10002, China) [ABSTRACT] The flareless internal rolling technology is an important technology in the hydraulic pressure system. The technology has high sealing performance and connection strength. So it has been used widely in the aeronautical area meet- ing for the reliable requirement. For the internal rolling tube joint of Ti alloy, the connection strength is generated because of the common action of radial contact force and axial pull-off strength between tube and sleeve. The influence regularity of sleeve structure to connection strength is catched. Deepening the depth of sleeve beard can increase the connection strength. If the width is over wide, which can inhibit the tube embedding in sleeve and reduce the connection strength. It is instruc- tive to increase the reliable performance for hydraulic pressure system of plane. Keywords: Tube; Flareless internal rolling; Connection strength DOI: 10.16080/j.issn1671-833x.2016.22.084 随