面向客户满意的人像产品三维建模相似度提升及评价技术分析-机械制造及其自动化专业毕业论文.docxVIP

重庆大学 重庆大学硕士学位论文 英文摘要 PAGE PAGE IV similarity enhancement. on this basis, with the reference of knowledge of character features and fusing 3D sculpture techniques, the implementation process of similarity enhancement is proposed including model modification analysis, remodeling the large-scale of portrait model, carving facial details, capturing personality characteristics. Then, a customer satisfaction evaluation and application for portrait product is studied. According to the demand analysis of customer satisfaction evaluation of portrait product, requirement information are recognized and classified based on Kano model, and the customer satisfaction mathematical models of attractive, one-dimensional, must-be and reverse requirements are established respectively. On this basis, an optimized Kano-QFD integrated model is built to achieve accurate mapping between customer needs and product attributes, and its quantitative methods for every steps are introduced in detail. Finally, the above method is applied to personalized portrait product development project, and an application case for portrait product modeling is given in the paper. The case results show that the proposed methods and the established customer satisfaction evaluation and application models have good application effect, and it improves the modeling efficiency and model similarity in some degree. Keywords: Portrait Product, 3D Modeling, Similarity Enhancement, Customer Satisfaction Evaluation 重庆大学硕 重庆大学硕士学位论文 目 录 目 录 中文摘要I 英文摘要 II 1 绪 论 1 1.1 研究背景 1 1.2 研究目的和意义 2 1.3 研究现状分析 4 1.3.1 人像产品研究现状 4 1.3.2 人像产品建模研究现状 5 1.3.3 人像产品顾客满意度评价研究现状 8 1.4 研究内容及组织结构 11 2 面向相似度提升的人像产品三维建模方法研究 13 2.1 现有人像产品三维建模方法的不足之处 13 2.2 面向相似度提升的人像产品三维建模方法 14 2.2.1 人像产品三维建模需求分析 14 2.2.2 基于宏观变形和细节雕刻变形的人像产品三维建模方法 15 2.2.3 人像特征知识 16 2.2.4 人像产品三维建模详细流程 22 2.3 本章小结 24 3 人像产品三维建模相似度提升的实现过程 25 3.1 现阶段人像产品的不足 25 3.2 人像产品三维建模相似度提升需求分析 26 3.3 人像产品三维建模相似度提升的四步骤实现过程 27